Q18 of 26 Page 294

A child running a temperature of 101°F is given an antipyrin (i.e. a medicine that lowers fever) which causes an increase in the rate of evaporation of sweat from his body. If the fever is brought down to 98 °F in 20 min, what is the average rate of extra evaporation caused, by the drug. Assume the evaporation mechanism to be the only way by which heat is lost. The mass of the child is 30 kg. The specific heat of human body is approximately the same as that of water, and latent heat of evaporation of water at that temperature is about 580 cal g–1.

Given,

Mass of the child, m = 30kg


Initial temperature of the body of the child, T1 = 101°F


Final temperature of the body of the child, T2 = 98°F


Change in temperature, ΔT = 101 – 98 = 3°F


⇒ ΔT = [3 × (5/9)] °C


⇒ ΔT = 1.667 °C


Time taken to reduce the temperature, t = 20 min


Mass of the child, m = 30 kg = 30 × 103 g


Specific heat of the human body = Specific heat of water (c) = 1000 cal kg-1 °C-1


Latent heat of evaporation of water, L = 580 cal g–1


The heat lost by the child is given as


∆θ = mc∆T


⇒ ∆θ = 30 kg × 1000 cal kg-1 °C-1 × 1.667 °C = 50000 cal


Let m1 be the mass of the water evaporated from the child’s body in 20 min.


Loss of heat through water is given by


∆θ = m1L


∴ m1 = ∆θ/L


⇒ m1 = (50000 cal)/(580 cal g–1) = 86.2 g


Hence, average rate of extra evaporation caused by the drug, Rave = m1/t


⇒ Rave = (86.2 g)/(200 min)


⇒ Rave = 4.3 g/min.


NOTE: The specific heat is the amount of heat per unit mass required to raise the temperature by one degree Celsius.


More from this chapter

All 26 →
16

Answer the following questions based on the P-T phase diagram of carbon dioxide:

(a) At what temperature and pressure can the solid, liquid and vapour phases of CO2 co-exist in equilibrium?


(b) What is the effect of decrease of pressure on the fusion and boiling point of


CO2?


(c) What are the critical temperature and pressure for CO2? What is their significance?


(d) Is CO2 solid, liquid or gas at (a) –70 °C under 1 atm, (b) –60 °C under 10 atm, (c) 15 °C under 56 atm?

 17

Answer the following questions based on the P – T phase diagram of CO2:

(a) CO2 at 1 atm pressure and temperature – 60 °C is compressed isothermally.


Does it go through a liquid phase?


(b) What happens when CO2 at 4 atm pressure is cooled from room temperature at constant pressure?


(c) Describe qualitatively the changes in a given mass of solid CO2 at 10 atm pressure and temperature –65 °C as it is heated up to room temperature at constant pressure.


(d) CO2 is heated to a temperature 70°C and compressed isothermally. What changes in its properties do you expect to observe?

 19

A ‘thermacole’ icebox is a cheap and efficient method for storing small quantities of cooked food in summer in particular. A cubical icebox of side 30 cm has a thickness of 5.0 cm. If 4.0 kg of ice is put in the box, estimate the amount of ice remaining after 6 h. The outside temperature is 45 °C, and co-efficient of thermal conductivity of thermacole is 0.01 J s–1 m–1 K–1. [Heat of fusion of water = 335 × 103 J kg–1]

 20

A brass boiler has a base area of 0.15 m2 and thickness 1.0 cm. It boils water at the rate of 6.0 kg/min when placed on a gas stove. Estimate the temperature of the part of the flame in contact with the boiler. Thermal conductivity of brass = 109 J s–1 m–1 K–1; Heat of vaporisation of water = 2256 × 103 J kg–1.